ProductsCompressed Air, Gas & Vacuum Purification, Condensate ProcessingBekomat No-Air-Loss DrainsBekomat No-Air-Loss Drains

Bekomat No-Air-Loss Drains

Bekomat No-Air-Loss Drains

Bekomat No-Air-Loss Drains

Condensate formation is unavoidable. It is always a "by-product" of compressed air generation and spreads throughout the entire compressed air network. Approximately two-thirds of the condensate is produced in the aftercooler. The rest occurs anywhere in the network as the compressed air cools down. This problem is inherent in the system and can cause both damage and higher operating costs.

The solution is a condensate drainage system adapted to the actual amount produced. This will cut costs and prevent damage. BEKOMAT® condensate drains–designed for the electronically level-controlled discharge of the condensate in compressed air networksfunction without unnecessary loss of compressed air and with minimal energy input. Our customers are clearly convinced by the high economic effi ciency and reliability of the device: there are now more than 1,500,000 BEKOMAT® units installed worldwide.

Compared with fl oat drains, BEKOMAT® has decisive advantages, especially since it:

  • functions unaffected by dirt, resulting in realiable operation
  • is equipped with an alarm signal
  • requires very little maintenance
  • has large cross-sections to prevent emulsifi cation

BEKOMAT® also has decisive advantages over solenoid valves, especially since it:

  • operates in accordance with the actual condensate quanitiy
  • avoids unnecessary loss of compressed air
  • is equipped with a fault signal
  • has large cross-section value to prevent emulsifi cation

Product PDFs